Suction Dredger for Pumps Silt From The River and Sand From The Sea

• Customization: Available
• Type: Cutter Suction Dredger
• Power Type: Diesel
• Model NO.: YSCSD400H-15
• Cyclone Type: Hydrocyclone
• Slot Type: CTS
• Customized: Customized
• Condition: New
• Warranty: Three Years
• After-sales Service: Three Years
• Water Flow: 2000 M3
• Solid Capacity: 300 M3
• Max. Dredging Depth 45°: 15 M
• Maximum Discharge Distance: 2000 M
• Diameter Discharge Pipe: 14 Inch/350 mm
• Main Engine Power: 735 Kw
• Auxiliary Engine Power: 240 Kw
• Transport Package: Bulk Cargo
• Specification: 25m*5.5m*1.8m
• Trademark: yongsheng
• Origin: China
• HS Code: 8905100010
• Production Capacity: 50/Yeas

Product Description

Product Description

The cutter suction dredger uses a rotating auger to loosen the soil on the riverbed or seabed, mixes it with cement to form mud, sucks it into the pump body through the mud suction pipe and sends it to the mud discharge area through the mud discharge pipe. During the construction of the cutter suction dredger, dredging, mud transportation and mud unloading are all integrated and completed by itself, with high production efficiency. It is suitable for dredging in inland lakes and coastal ports with small wind and waves and low flow rate, and is more suitable for dredging sand, sandy loam, silt and other soils.

Detailed Photos

We design the cutter suction dredger in detail according to the customer's working conditions. For example, the cutter suction dredger used in the river is designed differently from the cutter suction dredger used at the seaside. The cutter suction dredger has different digging depths and mud discharge distances, so the diesel engine power used is different. At the same time, we configure the cutter suction dredger in all aspects according to the production required by the customer.
 

 

Product Parameters

The cutter suction dredger can dig within 15m, and can be designed to dig 25m or even 35m deep in reservoirs and the sea. We have a professional design team, and the cutter suction dredgers we design can apply for CCS certificates. If you need a cutter suction dredger, it is recommended to communicate in detail, and we will design a cost-effective cutter suction dredger in a targeted manner. The following conventional dredger parameter table can be used for your reference.

Model	YSCSD200	YSCSD250	YSCSD300	YSCSD350	YSCSD400	YSCSD450	YSCSD500	YSCSD600	YSCSD700
Solid capacity	80~108m³	150~200m³	225~300m³	300~400m³	400~600m³	500~760m³	600~800m³	750~1200m³	1000~1500m³
water flow rate	540m³	1000m³	1500m³	2000m³	2600~3000m³	3000~3800m³	3500~4000m³	4000~6000m³	7000~7800m³
pump lift	25~60m	25~60m	35~70m	35~75m	35~75m	35~75m	35~75m	35~75m	35~75m
Dredging Depth (45°)	1~8m	1~10m	1~15m	1~15m	1~15m	1~15m	1~15m	1~15m	1~15m
Dredger after assembly (m)	20.5*3.8*1.25	26.5*4.8*1.25	35*5.5*1.5	36*5.5*1.8	41*6.8*1.8	44*7.5*2	47*8.8*2.5	49*9.4*2.8	50*11*3.2
Draught	0.6m	0.75m	1m	1m	1.1m	1.2m	1.6m	1.8m	2m
Main Engine	205KW	258KW	456KW	735KW	735/920KW	1000KW	1250KW	1800KW	2536KW
Auxiliary engine power	\	75KW	122KW	205KW	294KW	426KW	426KW	735KW	1000KW
Fuel consumption	36L/h	60L/h	103L/h	168L/h	184L/h	255L/h	299L/h	453L/h	632L/h
cutter Diameter	0.85m	1m	1.2m	1.3m	1.5m	1.8m	1.8m	2.2m	2.6m
Hydraulic cutter power	22KW	37KW	55KW	75KW	120KW	220KW	240KW	440KW	660KW
The above technical parameters are for reference only and need to be determined based on the customer's underwater environment and technical requirements.

Certifications

We are a shipyard with national certificates and shipbuilding qualifications. The cutter suction dredgers we produce can be certified by international certificates, such as CCS.

Packaging & Shipping

Small cutter suction dredgers are transported by container. Its hull design can be designed according to the size of the container, which is small and flexible.

The mud pump of medium and large cutter suction dredgers is too large, so the size required to fit into the cabin is large, so it cannot be designed too small, otherwise there will be insufficient space for later maintenance. Therefore, it is designed to be assembled in parts and transported by bulk carriers.

 

Installation Instructions

After the cutter suction dredger arrives at the customer's site, we will install it on site and arrange 2 to 3 technicians to provide on-site guidance. We also have all the installation tools, and the customer only needs to find a crane on site.
After the installation is completed, our technicians will also provide on-site guidance and teach customers how to operate the dredger. If the customer feels that professional crew members can operate better, we can also help the customer hire professional crew members.

Our Advantages

The above introduces the parameters and details of our cutter suction dredger. We have many advantages. We will help customers with a full set of services for cutter suction dredgers, including mud discharge pipes and pipe floats. Customers can purchase from us at one time, with convenient quality assurance and perfect after-sales service.

Customers can also purchase a multifunctional anchor-lifting boat to cooperate with the dredger. It can pick up and drop off workers, transport oil, lift anchors, lift heavy objects, and tow a cutter suction dredger, etc.